Feed dogs are the critical component of a "drop feed" sewing machine. A set of feed dogs typically resembles two or three short, thin metal bars, crosscut with diagonal teeth, which move back and forth in slots in a sewing machine's needle plate. Their purpose is to pull ("feed") the fabric through the machine, in discrete steps, in-between stitches.
This arrangement is called "drop feed" in reference to the way the dogs drop below the needle plate when returning for the next stroke. Allen B. Wilson invented it during the time period 1850 to 1854,[1][2] while also developing the rotary hook. Wilson called it a "four-motion feed", in reference to the four movements the dogs perform during one full stitch: up into the fabric, back to pull the fabric along to the next stitch, down out of the fabric and below the needle plate, and then forward to return to the starting position.
Virtually all drop-feed sewing machines can vary their stitch length; this is typically controlled by a lever or dial on the front of the machine. They are usually also capable of pulling the fabric backwards, to form a backstitch.
See also
BearbeitenReferences
Bearbeiten- ↑ Wilson received US patent 12116 on 19 December 1854 specifically for the four-motion feed; however, his machine that won US patent 9041 on 15 June 1852 was already using a moving feed dog whose tooth emerges from a slotted plate.
- ↑ The date of 1850 is given by James Paton in his "Sewing Machines" article in the Encyclopædia Britannica 10th Edition, retrieved 2010-08-06 from http://www.1902encyclopedia.com/S/SEW/sewing-machines.html, but as noted, Wilson's idea evolved over the course of his patents