Die Dokumentation für dieses Modul kann unter Modul:Convert/text/sandbox/Doku erstellt werden
-- Text used by Module:Convert, for en.wikipedia.org (English).
-- This is a separate module to simplify translation for use on another wiki.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
local translation_table = {
numdot = ',', -- decimal mark
numsep = ' ', -- separator for number grouping
per_word = 'per', -- for units like "miles per gallon"
plural_suffix = '', -- disable plural unit names
specials = { -- for special processing by makeunits
-- PLEASE DO NOT CHANGE THE FOLLOWING
-- until all the units have been fixed
-- (the text used here must be the same as that used in the unit definitions).
utype = {
-- ["unit type in local language"] = "name_used_in_this_script"
["efficenza del carburante"] = "type_fuel_efficiency",
["lunghezza"] = "type_length",
["temperatura"] = "type_temperature",
["volume"] = "type_volume",
},
ucode = {
exception = {
-- ["unit code in local language"] = "name_used_in_module_convert"
["ft"] = "integer_more_precision",
["in"] = "subunit_more_precision",
["lb"] = "integer_more_precision",
},
istemperature = {
-- Common temperature scales (not keVT or MK).
-- ["unit code in local language"] = 1
["C"] = true,
["F"] = true,
["K"] = true,
["R"] = true,
},
usesymbol = {
-- Use unit symbol not name if abbr not specified.
-- ["unit code in local language"] = 1
["C"] = 1,
["F"] = 1,
["K"] = 1,
["R"] = 1,
["C-change"] = 1,
["F-change"] = 1,
["K-change"] = 1,
},
alttype = {
-- Unit has an alternate type that is a valid conversion.
-- ["unit code in local language"] = "alternate type in local language"
["Nm"] = "energia",
["ftlb"] = "momento meccanico",
["ftlb-f"] = "momento meccanico",
["ftlbf"] = "momento meccanico",
["inlb"] = "momento meccanico",
["inlb-f"] = "momento meccanico",
["inlbf"] = "momento meccanico",
["inoz-f"] = "momento meccanico",
["inozf"] = "momento meccanico",
},
},
},
mtext = {
-- Text used by Module:Convert/makeunits.
titles = {
-- name_used_in_this_script = "Title of page"
conversion_data = 'Template:Converti/Man/Conversion data',
},
},
}
-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
-- The prefix field is what the prefix should be, if different from the prefix used.
['Y'] = { exponent = 24, name = 'yotta'},
['Z'] = { exponent = 21, name = 'zetta'},
['E'] = { exponent = 18, name = 'exa' },
['P'] = { exponent = 15, name = 'peta' },
['T'] = { exponent = 12, name = 'tera' },
['G'] = { exponent = 9, name = 'giga' },
['M'] = { exponent = 6, name = 'mega' },
['k'] = { exponent = 3, name = 'chilo'},
['h'] = { exponent = 2, name = 'etto'},
['da']= { exponent = 1, name = 'deca' },
['d'] = { exponent = -1, name = 'deci' },
['c'] = { exponent = -2, name = 'centi'},
['m'] = { exponent = -3, name = 'milli'},
['μ'] = { exponent = -6, name = 'micro', prefix = 'µ'}, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = 'micro'}, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = 'micro', prefix = 'µ'}, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = 'nano' },
['p'] = { exponent =-12, name = 'pico' },
['f'] = { exponent =-15, name = 'femto'},
['a'] = { exponent =-18, name = 'atto' },
['z'] = { exponent =-21, name = 'zepto'},
['y'] = { exponent =-24, name = 'yocto'},
}
-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
{ "US", link = "Sistema consuetudinario statunitense" },
{ "U.S.", link = "Sistema consuetudinario statunitense" },
{ "imperial", link = "Sistema imperiale britannico" },
{ "imp", link = "Sistema imperiale britannico" },
}
-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
["3"] = { "migliaia di", exponent = 3 },
["6"] = { "milioni di", exponent = 6 },
["9"] = { "miliardi di", link = "Miliardo", exponent = 9 },
["12"] = { "bilione di", link = "Bilione", exponent = 12 },
["15"] = { "biliardo di", link = "Biliardo (numero)", exponent = 15 },
}
-- One of the following categories is included in the text of each message.
local all_categories = {
unit = "[[Categoria:Errori di compilazione del template Converti]]",
option = "[[Categoria:Errori di compilazione del template Converti]]",
}
-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '"', ['}'] = '"' } -- no longer need the more elaborate substitute used before 2013-09-28
-- All messages that may be displayed if a problem occurs.
local all_messages = {
-- Message format string, %s parameters: anchor, title, text, category.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Template:Converti/Man/Messaggi#%s|<span title="Converti: %s">converti: %s</span>]]</i>]</sup>%s',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Template:Converti/Man/Messaggi#%s|<span title="Converti: %s">%s</span>]]</sup>%s',
-- Each of following messages is a table:
-- { [1] = 'title', -- mouseover title text
-- [2] = 'text', -- link text displayed in article
-- [3] = 'category key', -- key to lookup category in all_categories
-- [4] = 'anchor', -- anchor for link to relevant section on help page
-- regex = gsub_regex,
-- replace = gsub_table,
-- } Mouseover title text Link text CatKey Anchor
cvt_bad_num = { 'Il valore "%s" deve essere un numero', 'numero non valido', 'option', 'invalid_number'},
cvt_big_prec = { 'La precisione "%s" è troppo grande', 'precisione troppo grande', 'option', 'precision_too_large' },
cvt_invalid_num = { 'Overflow aritmetico del numero', 'overflow aritmetico', 'option', 'number_overflow' },
cvt_no_num = { 'Manca il numero da convertire', 'serve un numero', 'option', 'needs_number' },
cvt_no_num2 = { 'Manca un altro numero all\'intervallo', 'serve un altro numero', 'option', 'needs_another_number' },
cvt_bad_frac = { 'Il frazionale "%s" deve essere un intero maggiore di 1', 'frazione non valida', 'option', 'invalid_fraction' },
cvt_bad_prec = { 'La precisione "%s" deve essere un intero', 'precisione non valida', 'option', 'invalid_precision' },
cvt_bad_sigfig = { 'sigfig "%s" deve essere un intero positivo', 'sigfig non valido', 'option', 'invalid_sigfig'},
cvt_empty_option = { 'Opzione vuota "%s" ignorata', 'opzione vuota', 'option', 'empty_option' },
cvt_deprecated = { 'Opzione "%s" deprecata', '*', 'option', 'opzione deprecata', format = 'cvt_format2' },
cvt_no_spell = { 'Spelling is not available', 'bug, ask for help', 'option', 'ask_for_help' },
cvt_unknown_option = { 'Opzione "%s" non valida, è stata ignorata', 'opzione non valida', 'option', 'invalid_option'},
cvt_bad_default = { 'L\'unità di misura "%s" ha un valore di default non valido', 'bug, ask for help', 'unit', 'ask_for_help' },
cvt_bad_unit = { 'L\'unità di misura "%s" non è valida', 'unità di misura non valida', 'unit', 'unit_invalid_here' },
cvt_no_default = { 'L\'unità di misura "%s" non ha un\'unità di conversione valida', 'bug, ask for help', 'unit', 'ask_for_help' },
cvt_no_unit = { 'Manca il nome dell\'unità di misura', 'nome dell\'unità mancante', 'unit', 'needs_unit_name' },
cvt_unknown = { 'Il nome dell\'unità di misura "%s" non è stato riconosciuto', 'unità di misura sconosciuta', 'unit', 'unknown_unit' },
cvt_should_be = { '%s', 'unità ambigua', 'unit', 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace },
cvt_mismatch = { 'Non posso convertire l\'unità di misura "%s" in "%s"', 'unità di misura incompatibili', 'unit', 'unit_mismatch' },
cvt_bug_convert = { 'Bug: non posso convertire tra le unità specificate', 'bug, ask for help', 'unit', 'ask_for_help' },
cvt_lookup = { 'L\'unità "%s" non è definita correttamente', 'bug, ask for help', 'unit', 'ask_for_help' },
cvt_enwiki_num = { 'Il valore "%s" dovrebbe essere scritto come: "%s"', 'numero non valido', 'option', 'invalid_number' },
}
-- Text to join input value/unit with output value/unit.
local disp_joins = {
-- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; "
-- [wantname] gives default abbr=off
["or"] = { " o " , "" , " o ", wantname = true },
["sqbr-sp"] = { " [" , "]" },
["sqbr-nbsp"] = { " [" , "]" },
["comma"] = { ", " , "" , ", " },
["slash-sp"] = { " / " , "" , wantname = true },
["slash-nbsp"] = { " / ", "" , wantname = true },
["slash-nosp"] = { "/" , "" , wantname = true },
["b"] = { " (" , ")" },
["(or)"] = { " (" , ")", " or " },
["br"] = { "<br />" , "" , wantname = true },
["br()"] = { "<br />(" , ")", wantname = true },
}
-- Text to separate values in a range.
local range_types = {
-- Specifying a table requires either:
-- * "off" and "on" values (for "abbr=off" and "abbr=on"), or
-- * "input" and "output" values (for LHS and RHS);
-- other fields are optional.
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens.
-- With "exception = true", that also occurs with "adj=on|abbr=on".
-- If "adj" is defined here, that text (unchanged) is used with "adj=on".
["+"] = " + ",
[","] = ", ",
[", and"] = " e ",
[", or"] = " o ",
["by"] = " per ",
["-"] = "–",
["to about"] = " fino a circa ",
["and"] = { off = " e ", on = " e " },
["and(-)"] = { input = " e ", output = "–" },
["or"] = { off = " o " , on = " o "},
["to"] = { off = " fino a " , on = " fino a " },
["to(-)"] = { input = " a ", output = "–" },
["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true },
["by(x)"] = { input = " per ", output = " × ", out_range_x = true },
["x"] = { off = " per ", on = " × ", abbr_range_x = true },
["X"] = { off = " per ", on = " × " }, -- TEMPORARY and undocumented option for experiments to compare with new abbr_range_x
["xx"] = " × ",
["*"] = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}
}
local range_aliases = {
-- ["alternative name for a range"] = "standard range name"
["&"] = "and",
["e"] = "and",
["–"] = "-",
["–"] = "-",
["to-"] = "to(-)",
["a-"] = "to(-)",
["×"] = "x",
["×"] = "x",
["±"] = "+/-",
["±"] = "+/-",
["o"] = "or",
["per"] = "x",
["per(x)"] = "by(x)",
["fino a"] = "to",
["fino a(-)"] = "to(-)",
["fino a circa"] = "to about"
}
-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}.
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, 'x' after 'xx'.
local range_words = { '-', '–', 'xx', 'x', '*' }
local ranges = {
types = range_types,
aliases = range_aliases,
words = range_words,
}
-- Valid option names.
local en_option_name = {
-- ["local text for option name"] = "en name used in this module"
["$"] = "$",
["abbr"] = "abbr",
["adj"] = "adj",
["comma"] = "comma",
["debug"] = "debug",
["disp"] = "disp",
["frac"] = "frac",
["lang"] = "lang",
["lk"] = "lk",
["near"] = "near",
["order"] = "order",
["round"] = "round",
["sigfig"] = "sigfig",
-- ["sing"] = "adj", -- "sing" is an old alias for "adj"
["sortable"] = "sortable",
-- ["sp"] = "sp",
-- ["spell"] = "spell",
["stylein"] = "stylein",
["styleout"] = "styleout",
}
-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At en.wiki, "abbr" includes:
-- ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, this script sets:
-- parms["opt_nocomma"] = true
-- parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated.
local en_option_value = {
-- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$"
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["comma"] = "opt_nocomma?", -- no numsep in input or output numbers
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["h"] = "on", -- abbr=on + use "h" for hand unit (default)
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit
["in"] = "in", -- use symbol for LHS unit
["mos"] = "mos", -- in a range, repeat the input unit (no longer used)
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_also_symbol", -- show input unit symbol as well as name
--- localizzazioni in italiano
["valori"] = "opt_values", -- show only input and output numbers, not units
},
["adj"] = {
["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
["flip"] = "opt_flip?", -- reverse order of input/output
["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output)
["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers
["off"] = "", -- ignored (off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri0"] = "opt_ri=0", -- round input with precision = 0
["ri1"] = "opt_ri=1", -- round input with precision = 1
["ri2"] = "opt_ri=2", -- round input with precision = 2
["ri3"] = "opt_ri=3", -- round input with precision = 3
},
["comma"] = {
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits
["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark
["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5
["off"] = "opt_nocomma", -- no numsep in input or output numbers
},
["debug"] = {
["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
},
["disp"] = {
["/"] = "or?", -- see "slash"
["2"] = "opt_output_only?", -- display only output value and symbol/name (not input)
["5"] = "opt_round=5", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination
["br"] = "br", -- join: '<br />'
["br()"] = "br()", -- join: '<br />(...)'
["comma"] = "comma", -- join: ','
["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5
["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name)
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["s"] = "or?", -- see "slash"
["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output is suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center"
["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value)
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: <first>...<second> (user-specified text)
-- localizzazioni in italiano
["(o)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination
["inverti"] = "opt_flip", -- reverse order of input/output
["inverti5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5
["novirgola"] = "opt_nocomma?", -- no numsep in input or output numbers
["numero"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name)
["o"] = "or", -- join: 'or'
["preunità"] = "opt_two_preunits", -- user-specified text before input and output units
["quadre"] = "sqbr", -- join: '[...]'
["risultato"] = "opt_output_only",
["valore risultato"] = "opt_output_number_only",
["tabella"] = "opt_table", -- output is suitable for a table cell with align="right"
["tabellac"] = "opt_tablecen", -- output is suitable for a table cell with align="center"
["unità"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unità o testo"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unità2"] = "opt_output_unit_only",
["virgola"] = "comma" -- join: ','
},
-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more
["lang"] = { -- language for output digits (both en and local digits are always accepted for input)
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en)
},
["lk"] = {
["in"] = "in", -- link LHS unit name or symbol
["off"] = "off", -- do not link: same as default except for hand unit
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit)
["out"] = "out", -- link RHS unit name or symbol
},
["near"] = {
["5"] = "opt_round=5?", -- round output value to nearest 5
},
["order"] = {
["flip"] = "opt_flip", -- reverse order of input/output
},
["round"] = {
["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5
["0,5"] = "opt_round=0.5", -- round output value to nearest 0.5
["5"] = "opt_round=5", -- round output value to nearest 5
["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1")
["25"] = "opt_round=25", -- round output value to nearest 25
["50"] = "opt_round=50", -- round output value to nearest 50
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
},
-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
["sortable"] = {
["off"] = "", -- ignored (off is the default)
["in"] = "opt_sortable_on?", -- same as "on"
["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit
["out"] = "opt_sortable_on?", -- same as "on"
},
-- ["sp"] = {
-- ["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre")
-- },
-- ["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions
-- ["in"] = "opt_spell_in", -- spell input value in words
-- ["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase
-- ["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words
-- ["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
-- },
-- stylein=x is handled as a special case: x can be any text
-- styleout=x is handled as a special case: x can be any text
}
return {
SIprefixes = SIprefixes,
all_categories = all_categories,
all_messages = all_messages,
currency = { ['$'] = true, ['£'] = true },
customary_units = customary_units,
disp_joins = disp_joins,
en_option_name = en_option_name,
en_option_value = en_option_value,
eng_scales = eng_scales,
ranges = ranges,
translation_table = translation_table,
}